EVERYGLOW® Professional Glow-in-the-dark Non-Skid Tape

Eliminate the risk of slips and falls in any lighting condition. Our Glow-in-the-Dark Non-Skid Tape is a high-performance safety solution that provides 24/7 protection. By combining an aggressive, industrial-grade traction surface with advanced photoluminescent technology, this tape ensures that hazardous edges, stairs, and walkways remain visible and slip-resistant even during total power failures or in dimly lit environments.

Key Features of glow in the dark non-skid tape

• Dual-Action Safety: Features a high-friction 60-grit abrasive surface to prevent skidding, paired with a central photoluminescent strip for visual guidance in the dark.
• Rapid Charging & Long Glow: Naturally “charges” using any ambient light source (sunlight, 365nm UV Light, Флуоресцентный, or LED). После зарядки, it provides a consistent, high-intensity glow for up to 12 Часы.
• Industrial-Grade Adhesive: Equipped with a heavy-duty acrylic pressure-sensitive adhesive that bonds permanently to concrete, metal, wood, and plastic.
• Weatherproof & Resilient: Designed to withstand heavy foot traffic, moisture, and chemical exposure. Ideal for both indoor warehouse use and outdoor deck or porch safety.
• Non-Toxic & Eco-Friendly: Crafted from safe, non-radioactive materials. This “always-on” safety system requires no batteries or electricity, making it a sustainable choice for emergency egress.

Common Applications

• Residential: Basement stairs, garage steps, outdoor decks, and kids’ play areas.
• Commercial: Fire escape routes, theater aisles, parking garages, and hospitality stairwells.
• Industrial: Warehouse loading docks, equipment edges, and low-light manufacturing zones.

Технические характеристики

• Surface Material: Premium Aluminum Oxide (60-Grit)
• Base Material: Durable PET/PVC
• Glow Duration: Visible for 8–12 hours after a full charge
• Temperature Range: Reliable performance from -10°C to 60°C
• Standard Sizes: Available in 2-inch and 4-inch widths, Length from 3m,5m.10m,18.3m.

Installation Instructions

1. Clean: Ensure the surface is dry and free of dust, oil, or debris.
2. Measure & Cut: Cut the tape to the desired length using heavy-duty scissors.
3. Apply: Peel the backing and press firmly from the center outward to remove air bubbles.
4. Set: Allow 24 Часы for the adhesive to fully cure before heavy foot traffic.

SEO Tip: Use a “Day vs. Night” comparison image on your product page to visually demonstrate the photoluminescent intensity, as this is the primary conversion driver for this product category.