Beskrivelse
Everyglow WLBSB series Photoluminescent pigment is a alkali-earth silicate base phosphorescent material, after coating a special layer on the crystals surface to giant the good performance water resistant, Everyglow WLBSB waterproof glow in the dark pigment available glow 8-12hours when absorb the visible light for 5-30mins,
og dette udsender & absorbere lysproces er gentagne gange,Ingen strømanmodning.
Produkter Egenskaber:
Fri for radioaktive grundstoffer , giftfri, harmløs, Miljøvenligt materiale.
Longer afterglow time and super higher luminance than traditional ZnC sulphur luminecent material.
Excellent heat resistance . Good performace for temperature as high as 800℃
Perfect light resistance. under 300W high pressure mercury lamp for 1000hr even not reduce them luminance.
High chemicals stability. Everyglow PL pigment not reaction with any organic and inorganic agents except mercury.
Long life time. as long as 30years life time.
Series | LBSB-D | D50= 9um | |
Chemical composition | Sr2MgSi207 | Udseende | Pale green |
Average Dimater | 5~15μm | Glød farve | sky-blue |
Specific gravity | 3.7 | Exciting wavelength(nm) | 200~450nm |
MOH’s Hardness | 6.1~6.7 | Emission wavelength | 475nm |
Hydrous content | <0.05% | Efterglød luminans mcd/m2 | >230mcd/m2 at 10mins |
PH (in Water) | 8~9.5 | >40mcd/m2 at 60mins |
Products code | Particle size | Efterglød luminans mcd/m2 | Glød farve | |
(um) | 10mins | 60mins | ||
WLBSB-A | 50~70um | 330 | 50 | Sky-blue |
WLBSB-B | 35~50um | 270 | 43 | |
WLBSB-C | 15~35um | 235 | 30 |
Seddel: Test standard: DIN67510 del 1
1) Ophidset af lyskilde D65 1000Lx i 10 minutter;
2)Efterglødetiden angiver den tid, hvor pigmentet falder til 0.32 MCD/M2
3) Fejlen om ± 10% er tilladt i ovenstående data.
4) Color: G-yellow-green , B-aqua , P-purple , SB-sky-blue.
Pakke:
1kg/bag, 25kg/drum, 500kg/pallet.
Ansøgning:
These pigment is mainly applicable as an additive in the paints, coating, ink, plastics,glass,ceramic, fibre and other transparent medium to realize it self-luminescent function. (Suggest use waterbase paint, ink and use for plastics injection process).